Product details of SOBO Aquarium Internal Power Filter WP-1200F (Mechanical Filtration For Salt Water and Fresh Water)
- ​​​Type: Power.
- Ideal water circulator used for internally filtering the aquarium water.
- The air pipe attached with the internal filter, provides oxygenation / aeration to the aquarium water.
- Absorbs dirt, keeps water clear, suitable for any aquarium and all kinds of filtration.
- Completely submersible motor, safe & quiet operation.
- Suitable for fresh and sea / marine water.
- Removes physical particles by suction, assists inbiological filtration in the filter media.
- The filter media / sponge, filters the dirt and trap it in its pores.
- It is important to clean the sponge regularly. While cleaning the sponge & filter media, it is recommended to use the aquarium water and not tap water.
- Performing regular maintenance can prolong the life span of the pump. During installation, ensure the power plug is inserted to the power socket outlet at the higher point. This is to ensure that water will not back flow via the wire to the socket outlet or via the air pipe.
- Don't run the dry pump.
- In case your aquarium is sufficiently aerated / oxygenated you could block the air intake in the filter.
PRODUCT DESCRIPTION: Always disconnected form the electrical socket before performing maintenance. Always ensure the pump is submerged in water. Don't lift the pump unit by pulling the wire (Power Cord). The power supply cord provided for this appliance cannot be replaced.
SOBO WP-1200F Internal Aquarium Filter:
This filter is completely submerged into water and is used for aquarium filtration. It produces air bubbles and thus help increasing oxygen level of your tank at the same time.
FEATURES:
Fast and efficient filtration.
In build sponge consumes dirt and other waste products, it also promotes useful bacteria growth and helps bio filtration as well.
Produce air bubbles at the same time.
Suitable for both fresh water and marine filtration.
PERFORMANCE: A clogged or dirty intake screen will generally reduce the performance of the pump. Hence, you must wash away the surrounded debris frequently. If less flow is required, adjust the flow control level.
NOTE: Performing regular maintenance can prolong the life span of the pump. During installation, ensure the power plug of the pump is inserted to the power socket outlet at the higher point. This is to ensure that water will not back flow via the wire to the socket outlet.
MAINTENANCE: Remove the front cover and the impeller cover, followed by the impeller unit. Use a small brush to clean the cylinder or just wash away the debris under running water.
REMINDER: If the pump fails to operate, check and ensure there is a consistent power supply to the pump unit.
Trouble Shooting: If the pump fails to operate, please check and ensure there is a consistent power supply to the pump unit.
Power: 15W
Voltage: 220-240V
Frequency: 50/60Hz
F.Max: 880 L/H
Ideal for aquarium tank of 150 - 250 liters capacity.
